Oxford Shingle Specifications
Colors
Pre-Formed Flashings and Accessories
- Hip and ridge caps
- Self-cleaning valley
- Combination starter strip / drip edge
- Gable edge trim and gable caps
- Sidewall flashing
- Vent pipe flashing
- Matching coil stock
- Color-matched butyl sealant
- RoofAquaGuard underlayment
- Aluminum screw shank nails
- Unique fastening clips
- Optional snow guards
- Available foam inserts for high traffic areas
- Custom touches unique to each roof to make it seamless
Panel Measurements
60? x 12?, 20 panels per 100 square feet; Weight is 40 pounds per square
Oxford Shingles have a four-way interlock that locks each panel to the surrounding panels. The panels are secured to the roof using aluminum fastening clips. The clips, are attached to the panels’ top locks, allow the panels to expand and contract as necessary. The product’s low weight allows installation over many existing roofs.
Aluminum
.024” thick roofing panels; Matching accessories are .019” or .024” thick aluminum
All aluminum panels and accessories are made of 3105-H25 aluminum sheet (minimum tensile strength 26,000 psi; minimum yield strength 22,000 psi) or equivalent. The aluminum has minimum 95% recycled content.
Minimum Roof Pitch
3:12
Finish
Kynar 500 or Hylar 5000 Country Manor Shake panels and factory-formed accessories are protected with a two-coat, high performance Kynar 500 or Hylar 5000 coating, which includes a protective primer and baked-on high-performance topcoat to resist chalking, fading, and deterioration. The finish includes reflective pigment to enhance the product’s energy efficiency.